Firefly and PC GAMESS-related discussion club

 
Learn how to ask questions correctly  
 
 

 

Alex Granovsky
gran@classic.chem.msu.su

the -ex option is not needed and should not be used if *.ex files
resides in the Firefly's working directory. In addition, some of
these extensions are not used when running in serial. Perhaps this was
the reason why it worked on laptop.

Kind regards,
Alex Granovsky


On Thu Jul 17 '14 10:22am, Siddheshwar Chopra wrote
---------------------------------------------------
>Dear Pavlo,
>As usual I thank you again for resolving this issue. As suggested by you I added -ex PATHOFLIBS to my command line and it worked like charm. However I am really unsure of what exactly is happening; the reason being I never faced this issue on my laptop with Linux mint on it. But this problem occured with my PC with same linux mint on it. Could you throw some light on it?
>Now everything is working well, but a clear understanding would help me to avert such problems in future. Thanks in advance Pavlo Sir.

>Regards,
>
>
>On Thu Jul 17 '14 0:28am, Pavlo Solntsev wrote
>----------------------------------------------
>>Check -ex command line option from the manual.
>>
>>
>>On Wed Jul 16 '14 9:14pm, Siddheshwar Chopra wrote
>>--------------------------------------------------
>>>Dear Pavel,
>>>I ran it using:

>>>mpirun -np 2 firefly810 -i input.inp -o output.log

>>>This command was issued from the location of input file.
>>>
>>>
>>>Regards,

>>>On Wed Jul 16 '14 3:37pm, Pavlo Solntsev wrote
>>>----------------------------------------------
>>>>How did you run it? Please, post a full command line you used to start FF.
>>>>Pavel.
>>>>
>>>>
>>>>
>>>>On Wed Jul 16 '14 1:20pm, Siddheshwar Chopra wrote
>>>>--------------------------------------------------
>>>>>Dear Sir,
>>>>>I have just tried running Firefly 8.1.0 rc2 on Linux mint. I am using the openmpi 1.4 executable file. I have copied all the ".x" files to /usr/local/bin. But when I try to run an input file, I am getting the following error message..Please help.

>>>>> Processor-specific dynamic link DGEMM library code not loaded.
>>>>> Using built-in DGEMM code instead.

>>>>> Warning: running without fastdiag runtime extension!

>>>>> Creating thread pool to serve up to � � � � � �128 threads.
>>>>>
>>>>>
>>>>> Loading P2P interface library... error loading library!
>>>>> node � � 0 reports error code � � �-1
>>>>> node � � 1 reports error code � � �-1

>>>>> ADDRESS 0xB32F63CE HAS INITIATED PROGRAM ABORT BECAUSE OF FATAL ERROR(S)

>>>>> � � � � � � � � � � � � TIMING STATISTICS ON NODE 0:
>>>>> CPU � � � �TIME: � STEP = � � �0.03 , �TOTAL = � � � �0.1 SECONDS ( � �0.0 MIN)
>>>>> WALL CLOCK TIME: � STEP = � � �0.03 , �TOTAL = � � � �0.0 SECONDS ( � �0.0 MIN)
>>>>> CPU UTILIZATION: � STEP = � � 90.67%, �TOTAL = � � 241.79%

>>>>> � � � � � 2 WORDS OF � �DYNAMIC MEMORY USED
>>>>> � � � 97536 BYTES OF � �HEAP MEMORY � �USED, � � � 32512 BYTES REMAIN IN USE
>>>>> EXECUTION OF FIREFLY TERMINATED ABNORMALLY AT 15:36:42 16-JUL-2014 � �
>>>>>###########################################

>>>>>Kind Regards,